Condensed dews are produced by the temperature differences between outside and inside.
The area where the floor is constructed with dry method using plywood and sandwich panel and where the floor is heated by electric heating wires didn’t produce the condensed dews because the floor is not placed with concrete.
The foundation where the concrete is placed produced condensed dews without exception.
Close examination of the reasons of condensed dew production showed that ordinary house doesn’t produce condensed dews because the insulation is not good and therefore, the boiler should be turned, and as soon as the floor starts to dry, the upper part starts to dry too, and subsequently, the moistures which are drying inside the room are discharged to the outside through the wall and windows. However, our WORLDDOMEHOUSE has some moisture at the window side which has the lowest insulation because our house has outstanding insulation capability and wall parts which are constructed with high-compressed Styrofoam don’t discharge the moistures to the outside.
This looks like condensed dews but actually, it is not. Even though the house needs at least one year to be dried, it doesn’t have sufficient time to be dried because the owner moves in just after the completion in autumn and the winter immediately follows but, the owner cannot live the door open in winter, which brings no air circulation.
In order to solve this problem, we installed the windows with double window and additionally applied the polycarbonates (렉산) around the top light on the ceiling and finally, we could completely block the condensed dews.